GROW S. Romijn Internet-Draft Reliably Coded Intended status: Standards Track J. Snijders Expires: 7 December 2023 Fastly E. Shryane RIPE NCC S. Konstantaras AMS-IX 5 June 2023 Near Real Time Mirroring (NRTM) version 4 draft-ietf-grow-nrtm-v4-02 Abstract This document specifies a one-way synchronization protocol for Internet Routing Registry (IRR) records. The protocol allows instances of IRR database servers to mirror IRR records, specified in the Routing Policy Specification Language (RPSL), between each other. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 7 December 2023. Romijn, et al. Expires 7 December 2023 [Page 1] Internet-Draft NRTM v4 June 2023 Copyright Notice Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Informal overview . . . . . . . . . . . . . . . . . . . . . . 3 3. Mirror server use . . . . . . . . . . . . . . . . . . . . . . 5 3.1. Key Configuration . . . . . . . . . . . . . . . . . . . . 5 3.2. Snapshot Initialization . . . . . . . . . . . . . . . . . 5 3.3. Publishing updates . . . . . . . . . . . . . . . . . . . 6 3.3.1. Delta Files . . . . . . . . . . . . . . . . . . . . . 6 3.3.2. Snapshot Files . . . . . . . . . . . . . . . . . . . 7 3.3.3. Update Notification File . . . . . . . . . . . . . . 7 3.3.4. Publication Policy Restrictions . . . . . . . . . . . 8 4. Mirror client use . . . . . . . . . . . . . . . . . . . . . . 8 4.1. Client Configuration . . . . . . . . . . . . . . . . . . 8 4.2. Initialization from snapshot . . . . . . . . . . . . . . 8 4.3. Processing Delta Files . . . . . . . . . . . . . . . . . 9 4.4. Signature and Staleness Verification . . . . . . . . . . 10 4.5. Policy Restrictions . . . . . . . . . . . . . . . . . . . 10 5. Update Notification File . . . . . . . . . . . . . . . . . . 10 5.1. Purpose . . . . . . . . . . . . . . . . . . . . . . . . . 10 5.2. Cache concerns . . . . . . . . . . . . . . . . . . . . . 10 5.3. File format and validation . . . . . . . . . . . . . . . 11 5.4. Signature . . . . . . . . . . . . . . . . . . . . . . . . 12 6. Snapshot File . . . . . . . . . . . . . . . . . . . . . . . . 12 6.1. Purpose . . . . . . . . . . . . . . . . . . . . . . . . . 13 6.2. Cache Concerns . . . . . . . . . . . . . . . . . . . . . 13 6.3. File format and validation . . . . . . . . . . . . . . . 13 7. Delta File . . . . . . . . . . . . . . . . . . . . . . . . . 14 7.1. Purpose . . . . . . . . . . . . . . . . . . . . . . . . . 14 7.2. Cache Concerns . . . . . . . . . . . . . . . . . . . . . 14 7.3. File format and validation . . . . . . . . . . . . . . . 14 8. Operational Considerations . . . . . . . . . . . . . . . . . 16 8.1. IRR object Validation . . . . . . . . . . . . . . . . . . 16 8.2. Intermediate mirror instances . . . . . . . . . . . . . . 17 Romijn, et al. Expires 7 December 2023 [Page 2] Internet-Draft NRTM v4 June 2023 8.3. Reading from local files . . . . . . . . . . . . . . . . 17 8.4. Public key rotation . . . . . . . . . . . . . . . . . . . 17 9. Security Considerations . . . . . . . . . . . . . . . . . . . 18 10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 19 11. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 19 12. References . . . . . . . . . . . . . . . . . . . . . . . . . 19 12.1. Normative References . . . . . . . . . . . . . . . . . . 19 12.2. Informative References . . . . . . . . . . . . . . . . . 20 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 20 1. Introduction The Internet Routing Registry (IRR) consists of several IRR Databases, each storing objects in the Routing Policy Specification Language (RPSL). About a dozen larger IRR Databases are well known and widely used, operated by different organisations, like RIRs and some large network operators. IRR objects serve many purposes, ranging from manual research by operators to automated network configuration and filtering. Most of these well known IRR Databases mirror IRR objects from some others, so that queries run against these instances provide a comprehensive view. Some parties also mirror IRR Databases to private IRR server instances, to reduce latency in queries, analyze IRR objects, or other purposes. NRTM version 4 is a protocol for IRR mirroring, designed to address issues in existing IRR Database mirroring protocols. In NRTMv4, IRR Databases publish their records on an HTTPS endpoint, with periodic Snapshot Files and regular Delta Files. Signing allows integrity checks. By only generating files once and publishing them over HTTPS, scalability is dramatically improved. It borrows some concepts in [RFC8182], as there are overlaps between the two protocols. 2. Informal overview In NRTMv4, a mirror server is an instance of IRR Database software that has a database of IRR objects and publishes them to allow mirroring by others. This can be retrieved by mirror clients, which then load the IRR objects into their local storage. Publication consists of three different files: Romijn, et al. Expires 7 December 2023 [Page 3] Internet-Draft NRTM v4 June 2023 * A single Update Notification File. This specifies the current Database version and locations of the Snapshot File and Delta Files. Additionally, there is an Update Notification Signature File, used to verify the authenticity of the Update Notification File. * A single active Snapshot File. This contains all published IRR objects at a particular version. The mirror server periodically generates a new snapshot. * Zero or more Delta Files. These contain the changes between two database version numbers. _Other compressions than GZIP are being considered by the authors pending further research._ The Update Notification file MUST be in the JavaScript Object Notation (JSON) format [RFC8259]. The Snapshot File and Delta Files MUST be in the JSON Text Sequences [RFC7464] format, so that each object in large files can be parsed independently. All files MUST use UTF-8 encoding and MAY be compressed with GZIP [RFC1952]. Mirror clients initially retrieve the small Update Notification File and a Snapshot File, from which they initialize their local copy of the Database. After that, mirror clients only retrieve the Update Notification File periodically to determine whether there are any changes, and then retrieve only the relevant Delta Files, if any. This minimizes data transfer. Deltas have sequential versions. Mirror clients are configured with the URL of an Update Notification File, name of the IRR Database, and a public signing key. This public key is used to verify the Update Notification File, which in turn contains hashes of all the Snapshot and Delta Files. Upon initialization, the mirror server generates a session ID for the Database. This allows long term caching and used by the client to determine that the Delta Files continue to form a full set of changes allowing an update to the latest version. If the mirror server loses partial history, or the mirror client starts mirroring from a different server, the session ID change will force a full reload from the latest Snapshot File, ensuring there are no accidental mirroring gaps. Mirror servers can use caching to reduce their load, particularly because snapshots and deltas are immutable for a given session ID and version number. These are also the largest files. Update Notification Files may not be cached for longer than one minute, but are fairly small. Romijn, et al. Expires 7 December 2023 [Page 4] Internet-Draft NRTM v4 June 2023 Note that in NRTMv4, a contiguous version number is used for the Database version and Delta Files. This is different and unrelated to the serial in NRTMv3. NRTMv3 serials refer to a single change to a single object, whereas a NRTMv4 version refers to one delta, possibly containing multiple changes to multiple objects. NRTMv3 serials can also contain gaps, NRTMv4 versions may not. 3. Mirror server use 3.1. Key Configuration When enabling NRTMv4 publication for an IRR Database, the operator MUST generate and configure a private Ed25519 [RFC8032] key. The operator then provides this public key, the name of the IRR Database, and publication URL of the Update Notification File to any operators of mirror clients. The process for providing this is not in scope of this protocol, but a typical case is publication on the operator's known website. Key rotation is described in Section 8.4. It is RECOMMENDED that implementations provide easily accessible tools for operators to generate new Ed25519 keys to enter into their configuration and assist with key rotation. All configuration options SHOULD be clearly named to indicate that they are private keys. 3.2. Snapshot Initialization A mirror server MUST follow the initialization steps upon the first export for an IRR Database by that mirror server, or if the server lost history and can not reliably produce a continuous set of deltas from a previous state. In other words, either the mirror server guarantees that clients following the deltas have a correct and complete view, or MUST reinitialize, which will force clients to reinitialize as well. Initialization consists of these actions: * The mirror server MUST generate a new session ID. This MUST be a random v4 UUID [RFC4122] and MUST be the same across all client sessions. However, if the server instance is serving two different IRR databases (e.g. RIPE IRR and RIPE-NONAUTH IRR), then it MUST generate two session IDs, each one associated with the different database. * The server MUST generate a snapshot for version number one. This may contain an empty array of objects if the IRR Database is currently empty. Romijn, et al. Expires 7 December 2023 [Page 5] Internet-Draft NRTM v4 June 2023 * The server MUST generate a new Update Notification File with the new session ID, a reference to the new snapshot, and no deltas. * The Update Notification Signature File MUST be updated for the new Update Notification File contents. Note that session IDs, versions and all files always relate to a specific IRR Database. For example, a mirror server publishing NRTMv4 for RIPE and RIPE-NONAUTH, will generate two Update Notification Files, referring two Snapshot Files, and two sets of Delta Files each with contiguous version numbers - all completely independent to each other, with different session IDs. This applies even if the same IRR server instance produces both. 3.3. Publishing updates 3.3.1. Delta Files Changes to IRR objects MUST be recorded in Delta Files. One Delta File can contain multiple changes. Updates are generated as follows: * A mirror server MUST publish a Delta File approximately every minute, if there have been changes to IRR objects in that time frame. * If multiple changes have occurred within the time frame that would cancel each other out, like an addition and immediate deletion of the same object, the mirror server MUST still include all these changes. * If a mirror server is lagging in production of Delta Files, such as after an initialization or server downtime, it MUST generate one larger "catch up" Delta File, rather than individual Delta Files for every one minute window. * A new Delta File MUST be generated with a new version, one greater than the last Delta File version, or one greater than the last Snapshot File version if there were no prior deltas at all. * The Delta File MUST include all changes that happened during the time frame, in the order in which they occurred. * The URL where the Delta File is published MUST contain the session ID and version number to allow it to be indefinitely cached. It MUST also contain a random value that can not be predicted before publication, to counter negative caching issues. Romijn, et al. Expires 7 December 2023 [Page 6] Internet-Draft NRTM v4 June 2023 * After generating a new Delta File, a mirror server MUST remove all Delta Files older than 24 hours. * The Update Notification File MUST be updated to include the new Delta File and update the database version. * Note that, as Delta Files always contain changes compared to a previous state, there can never be a Delta File with version 1. 3.3.2. Snapshot Files Snapshot Files after initialization are generated as follows: * The mirror server MUST generate a new Snapshot File between once per hour and once per day, if there have been changes to the IRR objects. * The version number of the new snapshot MUST be equal to the last Delta File version. * If there have been no changes to the IRR objects since the last snapshot, the mirror server MUST NOT generate a new snapshot. * The URL where the Snapshot File is published MUST contain the session ID and version number to allow it to be indefinitely cached. It MUST also contain a random value that can not be predicted before publication, to counter negative caching issues. * The Update Notification File MUST be updated to include the new snapshot, if one was generated. * Snapshot generation may take some time, and in that time newer changes may occur that are not part of the snapshot in progress. The mirror server SHOULD continue to produce Delta Files during this window, which means the server MAY publish a Snapshot File with a version number older than the most recent Delta File. 3.3.3. Update Notification File The Update Notification File must be updated when a new Delta or Snapshot File is published and, even if there have been no changes, at least every 24 hours. After any update to the Update Notification file, the mirror server MUST also update the Update Notification Signature File for the new Update Notification File contents. Romijn, et al. Expires 7 December 2023 [Page 7] Internet-Draft NRTM v4 June 2023 3.3.4. Publication Policy Restrictions A mirror server MAY have a policy that restricts the publication of certain IRR objects or attributes, or modifies these before publication. Typical scenarios for this include preventing the distribution of certain personal data or password hashes, or excluding objects which do not meet validation rules like RPKI consistency. It is RECOMMENDED to modify objects in such a way that this change is evident to humans reading the object text, for example by adding remark lines or comments. Mirror servers are RECOMMENDED to remove password hashes from the auth lines in mntner objects, as they have little use beyond the authoritative server, and their publication may be a security risk. If a mirror server has a policy that restricts or modifies object publication, this MUST be applied consistently to Snapshot Files and Delta Files from the moment the policy is enacted or modified. 4. Mirror client use 4.1. Client Configuration Mirror clients are configured with the name of the IRR Database, the URL of the Update Notification File, and the public key currently used for signing the Update Notification File. Key rotation is described in Section 8.4. 4.2. Initialization from snapshot Clients MUST initialize from a Snapshot File when initially configured or if they are not able to update their local data from the provided Delta Files: * The client MUST retrieve the Update Notification File. * The client MUST verify that the source attribute in the Update Notification File matches the configured IRR Database name. * The client MUST retrieve the Snapshot File and load the objects into its local storage. * The mirror client MUST verify that the hash of the Snapshot File matches the hash in the Update Notification File that referenced it. If the Snapshot File was compressed with GZIP, the hash MUST match the compressed data. In case of a mismatch of this hash, the file MUST be rejected. Romijn, et al. Expires 7 December 2023 [Page 8] Internet-Draft NRTM v4 June 2023 * The client MUST record the configured authoritative domain, the session_id and version from the Update Notification File. 4.3. Processing Delta Files If a mirror client has previously initialized from a snapshot: * The client MUST verify that the configured Update Notification File URL matches the previously known URL. If this does not match, the client MUST reinitialize from the Snapshot File, using the new Update Notification File URL. * The client MUST retrieve the Update Notification File. * The client MUST verify that the session ID matches the previously known session ID. If this does not match, the client MUST reinitialize from the snapshot. * The client MUST verify that the Update Notification File version is the same or higher than the client's current most recent version, to the latest version in the Update Notification File. If not, the Update Notification File MUST be rejected. * The client MUST verify that the Update Notification File contains one contiguous set of Delta File versions from the client's current most recent version up to the latest version in the Update Notification File. If this is not found, the client MUST reinitialize from the snapshot. * The client MUST retrieve all Delta Files for versions since the client's last known version, if there are any. * The mirror client MUST verify that the hash of each newly downloaded Delta File matches the hash in the Update Notification File that referenced it. If the Delta File was compressed with GZIP, the hash MUST match the compressed file. In case of a mismatch of this hash, the Delta File MUST be rejected. * The client MUST process all changes in the Delta Files in order: lowest Delta File version number first, and in the order of the changes list in the Delta File. * The client MUST update its record of the most recent version to the version of the Update Notification File. If the Update Notification File or one of the Delta Files is rejected, the mirror client MUST NOT process any newer Deltas than those that are valid and have been successfully verified. Romijn, et al. Expires 7 December 2023 [Page 9] Internet-Draft NRTM v4 June 2023 4.4. Signature and Staleness Verification Every time a mirror client retrieves a new version of the Update Notification File, it MUST retrieve and verify the Update Notification Signature File. The signature MUST be valid for the configured public key for the contents of the Update Notification File. If the signature does not match, the mirror client MUST reject the Update Notification File, unless a key rotation is in progress as described in Section 8.4. A mirror client can use the generation timestamp in the Update Notification File to check whether the file is stale, as the mirror server must update this file at least every 24 hours. If the generation timestamp is more than 24 hours ago, the file is stale and the mirror client SHOULD warn the operator in log messages or other alerting, but MAY continue to process it otherwise. 4.5. Policy Restrictions A mirror client MAY have a policy that restricts the processing of objects to certain object classes, or other limitations on which objects it processes. If a mirror client has a policy that restricts object processing, this MUST be applied consistently to Snapshot Files and Delta Files from the moment the policy is enacted or modified. 5. Update Notification File 5.1. Purpose The Update Notification File is generated by the mirror server and used by mirror clients to discover whether any changes exist between the state of the IRR mirror server and of the mirror client's. It also describes the location of the Snapshot File and incremental Delta Files. Finally, the generation timestamp can be used to detect whether the file is stale. The mirror server MUST generate a new Update Notification File every time there are new deltas or snapshots and, even if there have been no changes, at least every 24 hours. 5.2. Cache concerns A mirror server may use caching infrastructure to cache the Update Notification File and reduce the load of HTTPS requests. Romijn, et al. Expires 7 December 2023 [Page 10] Internet-Draft NRTM v4 June 2023 However, since this file is used by mirror clients to determine whether any updates are available, the mirror server SHOULD ensure that this file is not cached for longer than one minute. An exception to this rule is that it is better to serve a stale Update Notification File rather than no Update Notification File. 5.3. File format and validation Example Update Notification File: { "nrtm_version": 4, "timestamp": "2022-01-00T15:00:00Z", "type": "notification", "next_signing_key": "96..ae", "source": "EXAMPLE", "session_id": "ca128382-78d9-41d1-8927-1ecef15275be", "version": 4, "snapshot": { "version": 3, "url": "https://example.com/ca128382-78d9-41d1-8927-1ecef15275be/nrtm-snapshot.2.047595d0fae972fbed0c51b4a41c7a349e0c47bb.json.gz", "hash": "9a..86" }, "deltas": [ { "version": 2, "url": "https://example.com/ca128382-78d9-41d1-8927-1ecef15275be/nrtm-delta.1.784a2a65aba22e001fd25a1b9e8544e058fbc703.json", "hash": "62..a2" }, { "version": 3, "url": "https://example.com/ca128382-78d9-41d1-8927-1ecef15275be/nrtm-delta.2.0f681f07cfab5611f3681bf030ec9f6fa3442fb0.json", "hash": "25..9a" }, { "version": 4, "url": "https://example.com/ca128382-78d9-41d1-8927-1ecef15275be/nrtm-delta.3.d9c194acbb2cb0d4088c9d8a25d5871cdd802c79.json", "hash": "b4..13" } ] } Note: hash values in this example are shortened because of formatting. The following validation rules MUST be observed when creating or parsing Update Notification Files: Romijn, et al. Expires 7 December 2023 [Page 11] Internet-Draft NRTM v4 June 2023 * The nrtm_version MUST be 4. * The timestamp MUST be an [RFC3339] timestamp. * The type MUST be "notification". * The optional field next_signing_key is used for in-band key rotation. If present, it MUST be an Ed25519 [RFC8032] public key encoded in base64 [RFC4648], which matches the private key the mirror server will start using to sign the Update Notification File in the near future. Key rotation is described in Section 8.4. * The source MUST be a valid IRR object name [RFC2622]. * The session_id attribute MUST be a random v4 UUID [RFC4122] unique to this session for this source. * The version MUST be an unsigned positive integer and be equal to the highest version of the deltas and snapshot. * The file MUST contain exactly one snapshot. * The file MAY contain one or more deltas. * The deltas MUST have a sequential contiguous set of version numbers. * Each snapshot and delta element MUST have a version, HTTPS URL and hash attribute. If the file was compressed with GZIP, the filename MUST end in ".gz". and the hash MUST match the compressed data. * The hash attribute in snapshot and delta elements MUST be the hexadecimal encoding of the SHA-256 hash [SHS] of the referenced file. The mirror client MUST verify this hash when the file is retrieved and reject the file if the hash does not match. 5.4. Signature The contents of Update Notification File MUST be signed using Ed25519 [RFC8032]. The public key for this signature is configured in the client. The signature of the Update Notification File MUST be published under the same path as the Update Notification File, appending ".sig". 6. Snapshot File Romijn, et al. Expires 7 December 2023 [Page 12] Internet-Draft NRTM v4 June 2023 6.1. Purpose The Snapshot File reflects the complete and current contents of all IRR objects in an IRR Database. Mirror clients MUST use this to initialize their local copy of the IRR Database. 6.2. Cache Concerns A snapshot reflects the content of the IRR Database at a specific point in time; for that reason, it can be considered immutable data. Snapshot Files MUST be published at a URL that is unique to the specific session and version. The URL MUST also contain a random value that can not be predicted before publication, to counter negative caching issues. Because these files never change, they MAY be cached indefinitely. However, as snapshots are large and old snapshots will no longer be referred by newer Update Notification Files, it is RECOMMENDED that a limited interval is used in the order of hours or days. To avoid race conditions where a mirror client retrieves an Update Notification File moments before it's updated, mirror servers SHOULD retain old Snapshot Files for at least 5 minutes after a new Update Notification File is published. 6.3. File format and validation Example Snapshot File: ␞{ "nrtm_version": 4, "type": "snapshot", "source": "EXAMPLE", "session_id": "ca128382-78d9-41d1-8927-1ecef15275be", "version": 3 } ␞{"object": "route: 192.0.2.0/24\norigin: AS65530\nsource: EXAMPLE"} ␞{"object": "route: 2001:db8::/32\norigin: AS65530\nsource: EXAMPLE"} Note: IRR object texts in this example are shortened because of formatting. The file is in JSON Text Sequences [RFC7464] format, and MUST contain one or more records. The first record is the file header, and the following validation rules MUST be observed when creating or parsing a Snapshot File header: * The nrtm_version MUST be 4. Romijn, et al. Expires 7 December 2023 [Page 13] Internet-Draft NRTM v4 June 2023 * The type MUST be "snapshot". * The source MUST match the source in the Update Notification File. * The session_id attribute MUST match the session_id in the Update Notification File. * The version MUST be an unsigned positive integer, matching the Update Notification File entry for this snapshot. The remaining records (zero or more) MUST each contain a string representation of an IRR object. The source attribute in the IRR object texts MUST match the source attribute of the Snapshot File. 7. Delta File 7.1. Purpose A Delta File contains all changes for exactly one incremental update of the IRR Database. It may include new, modified and deleted objects. Delta Files can contain multiple alterations to multiple objects. 7.2. Cache Concerns Deltas reflect the difference in content of the IRR Database from one version to another; for that reason, it can be considered immutable data. Delta Files MUST be published at a URL that is unique to the specific session and version. The URL MUST also contain a random value that can not be predicted before publication, to counter negative caching issues. To avoid race conditions where a mirror client retrieves an Update Notification File moments before it's updated, mirror servers SHOULD retain old Delta Files for at least 5 minutes after a new Update Notification File is published that no longer contains these Delta Files. 7.3. File format and validation Example Delta File: Romijn, et al. Expires 7 December 2023 [Page 14] Internet-Draft NRTM v4 June 2023 ␞{ "nrtm_version": 4, "type": "delta", "source": "EXAMPLE", "session_id": "ca128382-78d9-41d1-8927-1ecef15275be", "version": 3 } ␞{ "action": "delete", "object_class": "person", "primary_key": "PRSN1-EXAMPLE" } ␞{ "action": "delete", "object_class": "route", "primary_key": "192.0.2.0/24AS65530" } ␞{ "action": "add_modify", "object": "route: 2001:db8::/32\norigin: AS65530\nsource: EXAMPLE" } Note: IRR object texts in this example are shortened because of formatting. The file is in JSON Text Sequences [RFC7464] format, and MUST contain one or more records. The first record is the file header, and the following validation rules MUST be observed when creating or parsing a Delta File header: * The nrtm_version MUST be 4. * The type MUST be "delta". * The source MUST match the source in the Update Notification File. * The session_id attribute MUST match the session_id in the Update Notification File. * The version MUST be an unsigned positive integer, matching the Update Notification File entry for this delta. The remaining records (zero or more) MUST each contain a JSON object representing a change, which MUST meet the following rules: * An action attribute, which is either "delete" for object deletions, or "add_modify" for additions or modifications. Romijn, et al. Expires 7 December 2023 [Page 15] Internet-Draft NRTM v4 June 2023 * If action is "delete": an object_class attribute with the RPSL object class name, and a primary_key attribute with the primary key, of the deleted object. For objects that are listed in [RFC2622] and [RFC4012] the primary key is the value of the RPSL field defined as "class key". For object classes that define a pair of attributes as class key, e.g. route, the values of the individual attributes are appended together without separators. For any other objects, the primary key is the value of the RPSL field with the same name as the object class name. * If action is "add_modify": an object attribute with the RPSL text of the new version of the object. 8. Operational Considerations 8.1. IRR object Validation Throughout the years, various implementations of IRR servers have taken liberties with the various RFCs regarding RPSL. Implementations have introduced different new object classes, attributes and validation rules. Current IRR Databases also contain legacy objects which were created under different validation rules. In practice, there is no uniformly implemented standard for RPSL, but merely rough outlines partially documented in different places. This has the potential to create interoperability issues. Some are addressed by NRTMv4, like having a consistent character set when mirroring data between implementations. However, some issues can not be addressed in this way, such as one implementation introducing a new object class that is entirely unknown to another implementation. A mirror client SHOULD be able to handle unknown object classes and objects that are invalid according to its own validation rules, which may mean simply discarding them, without rejecting remaining objects or preventing future updates. It is RECOMMENDED for mirror clients to log these cases, particularly those where an object was discarded due to violating validation rules. These cases create an inconsistency between the IRR objects of the server and client, and logs facilitate later analysis. It is RECOMMENDED for mirror clients to be flexible where possible and reasonable when applying their own validation rules to IRR objects retrieved from mirror servers. For example, a route object with an origin attribute that is not a valid AS number can't be usefully interpreted. There is no way for an IRR server to correctly parse and index such an object. However, a route-set object whose name does not start with "RS-" [RFC2622], or an inetnum with an Romijn, et al. Expires 7 December 2023 [Page 16] Internet-Draft NRTM v4 June 2023 unknown extra "org" attribute, still allows the mirror client to interpret it unambiguously even if it does not meet the mirror client's own validation rules for authoritative records. 8.2. Intermediate mirror instances An IRR Database generally has a single authoritative source. In some cases, an instance run by a third party will function as a kind of intermediate: both being a mirror client, mirroring IRR objects from the authoritative source, and simultaneously function as a mirror server to yet another mirror client. There are various operational reasons for such a setup, such as the intermediate filtering certain records. Regardless of the reason, the mirror client and server function of an IRR server must be treated as separate processes. In particular, this means they MUST have separate session IDs. The intermediate server MUST NOT republish the same files it retrieved from the authoritative source with the same session ID. 8.3. Reading from local files In the typical use case for NRTMv4, a mirror client retrieves files from an HTTPS endpoint. However, implementations MAY also support reading from files on the local filesystem instead, for when operators want to use a different method to retrieve or distribute the files. When reading from local files, mirror clients SHOULD still follow all validation rules, including the validation of the signature and hashes. 8.4. Public key rotation It is RECOMMENDED that IRR Database operators rotate the signing key on their mirror server about once per year. The next_signing_key field in the Update Notification File supports in-band key rotation using the following process: * The server operator generates a new key and configures this in the mirror server implementation as the upcoming new signing key. * The mirror server MUST include this key in the next_signing_key field in any Update Notification File generated while the new signing key is configured. Hence, the new signing key will start being propagated to the mirror clients with the next publication of the Notification File, which will take at most 24 hours. Mirror server implementations MAY offer a method to cause the Notification Update File to be refreshed earlier, with the new_signing_key included, and thus start the propagation earlier. Romijn, et al. Expires 7 December 2023 [Page 17] Internet-Draft NRTM v4 June 2023 * When mirror clients next retrieve the Update Notification File, they MUST detect the next_signing_key field, and store the key in their configuration. * After allowing mirror clients time to have seen the new Update Notification File with the next_signing_key field, the mirror server operator configures the new key as currently active key, and removes the old key. Any Update Notification File generated after this point MUST be signed with this new key, and will not contain a next_signing_key field. * The RECOMMENDED period between publication of the upcoming key in the next_signing_key field, and removal of the old key, is one week. This offers all active clients a reasonable chance to follow the rotation process. * When mirror clients retrieve an Update Notification File and find that the signature does not match, they MUST attempt to verify against a next_signing_key encountered in a previous (valid) file. If the signature matches for this new key, the client MUST update its configuration to use the new key for validation. If a mirror client never retrieves an Update Notification file at any point during the rotation process, it will no longer be able to verify the signature. In that scenario manual recovery is required, similar to a first time configuration of a new mirror client. 9. Security Considerations IRR objects serve many purposes, including automated network configuration and filtering. Manipulation of IRR objects can therefore have a significant security impact. However, security in existing protocols is mostly absent. Before NRTMv4, the most common protocols for IRR Database mirroring are FTP for retrieving full snapshots, and NRTM version 3 for retrieving later changes. There are no provisions for integrity or authenticity, and there are various scenarios where mirroring may not be reliable. NRTMv4 requires integrity verification. The Delta and Snapshot Files are verified using the SHA-256 hash in the Update Notification File, and the Update Notification File is verified using its signature file. Additionally, the channel security offered by HTTPS further limits security risks. Romijn, et al. Expires 7 December 2023 [Page 18] Internet-Draft NRTM v4 June 2023 By allowing publication on any HTTPS endpoint, NRTMv4 allows for extensive scaling, and there are many existing techniques and services to protect against denial-of-service attacks. In contrast, NRTMv3 required mirror clients to directly query the IRR server instance with special whois queries. This scales poorly, and there are no standard protections against denial-of-service available. The HTTPS endpoint used for NRTMv4 MUST be configured according to the best practices in [RFC9325]. Mirror clients MUST NOT use other protocols than HTTPS, such as HTTP or FTP. 10. IANA Considerations This document requests IANA to ... 11. Acknowledgments The authors would like to thank George Michaelson, and ... for their helpful review of this document. 12. References 12.1. Normative References [RFC1952] Deutsch, P., "GZIP file format specification version 4.3", RFC 1952, DOI 10.17487/RFC1952, May 1996, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC2622] Alaettinoglu, C., Villamizar, C., Gerich, E., Kessens, D., Meyer, D., Bates, T., Karrenberg, D., and M. Terpstra, "Routing Policy Specification Language (RPSL)", RFC 2622, DOI 10.17487/RFC2622, June 1999, . [RFC3339] Klyne, G. and C. Newman, "Date and Time on the Internet: Timestamps", RFC 3339, DOI 10.17487/RFC3339, July 2002, . [RFC4012] Blunk, L., Damas, J., Parent, F., and A. Robachevsky, "Routing Policy Specification Language next generation (RPSLng)", RFC 4012, DOI 10.17487/RFC4012, March 2005, . Romijn, et al. Expires 7 December 2023 [Page 19] Internet-Draft NRTM v4 June 2023 [RFC4122] Leach, P., Mealling, M., and R. Salz, "A Universally Unique IDentifier (UUID) URN Namespace", RFC 4122, DOI 10.17487/RFC4122, July 2005, . [RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006, . [RFC7464] Williams, N., "JavaScript Object Notation (JSON) Text Sequences", RFC 7464, DOI 10.17487/RFC7464, February 2015, . [RFC8032] Josefsson, S. and I. Liusvaara, "Edwards-Curve Digital Signature Algorithm (EdDSA)", RFC 8032, DOI 10.17487/RFC8032, January 2017, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data Interchange Format", STD 90, RFC 8259, DOI 10.17487/RFC8259, December 2017, . [RFC9325] Sheffer, Y., Saint-Andre, P., and T. Fossati, "Recommendations for Secure Use of Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS)", BCP 195, RFC 9325, DOI 10.17487/RFC9325, November 2022, . [SHS] National Institute of Standards and Technology, "Secure Hash Standard", March 2012, . 12.2. Informative References [RFC8182] Bruijnzeels, T., Muravskiy, O., Weber, B., and R. Austein, "The RPKI Repository Delta Protocol (RRDP)", RFC 8182, DOI 10.17487/RFC8182, July 2017, . Authors' Addresses Romijn, et al. Expires 7 December 2023 [Page 20] Internet-Draft NRTM v4 June 2023 Sasha Romijn Reliably Coded Amsterdam Netherlands Email: sasha@reliablycoded.nl Job Snijders Fastly Amsterdam Netherlands Email: job@fastly.com Edward Shryane RIPE NCC Amsterdam Netherlands Email: eshryane@ripe.net Stavros Konstantaras AMS-IX Amsterdam Netherlands Email: stavros.konstantaras@ams-ix.net Romijn, et al. Expires 7 December 2023 [Page 21]