Building Blocks for HTTP APIs A. Wright Internet-Draft 6 September 2023 Intended status: Standards Track Expires: 9 March 2024 Byte Range PATCH draft-ietf-httpapi-patch-byterange-00 Abstract This document specifies a media type for PATCH payloads that overwrites a specific byte range, to allow random access writes, or allow a resource to be uploaded in several segments. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 9 March 2024. Copyright Notice Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Wright Expires 9 March 2024 [Page 1] Internet-Draft Byte Range PATCH September 2023 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1. Notational Conventions . . . . . . . . . . . . . . . . . 3 2. Modifying a content range with PATCH . . . . . . . . . . . . 3 2.1. The Content-Range field . . . . . . . . . . . . . . . . . 4 2.2. The Content-Length field . . . . . . . . . . . . . . . . 5 2.3. The Content-Type field . . . . . . . . . . . . . . . . . 5 2.4. Other fields . . . . . . . . . . . . . . . . . . . . . . 5 2.5. Applying a patch . . . . . . . . . . . . . . . . . . . . 5 2.6. The multipart/byteranges media type . . . . . . . . . . . 6 2.7. The message/byterange media type . . . . . . . . . . . . 6 2.7.1. Syntax . . . . . . . . . . . . . . . . . . . . . . . 7 2.8. The application/byteranges media type . . . . . . . . . . 8 2.8.1. Syntax . . . . . . . . . . . . . . . . . . . . . . . 8 2.9. Range units . . . . . . . . . . . . . . . . . . . . . . . 10 3. Segmented document creation with PATCH . . . . . . . . . . . 10 3.1. Example . . . . . . . . . . . . . . . . . . . . . . . . . 11 4. Preserving Incomplete Uploads with "Prefer: transaction" . . 12 5. Registrations . . . . . . . . . . . . . . . . . . . . . . . . 13 5.1. message/byterange . . . . . . . . . . . . . . . . . . . . 13 5.2. application/byteranges . . . . . . . . . . . . . . . . . 14 5.3. "transaction" preference . . . . . . . . . . . . . . . . 15 6. Security Considerations . . . . . . . . . . . . . . . . . . . 15 6.1. Unallocated ranges . . . . . . . . . . . . . . . . . . . 15 6.2. Document Size Hints . . . . . . . . . . . . . . . . . . . 15 7. References . . . . . . . . . . . . . . . . . . . . . . . . . 16 7.1. Normative References . . . . . . . . . . . . . . . . . . 16 7.2. Informative References . . . . . . . . . . . . . . . . . 16 Appendix A. Discussion . . . . . . . . . . . . . . . . . . . . . 17 A.1. Indeterminate Length Uploads . . . . . . . . . . . . . . 17 A.2. Sparse Documents . . . . . . . . . . . . . . . . . . . . 17 A.3. Recovering from interrupted PUT . . . . . . . . . . . . . 17 A.4. Splicing and Binary Diff . . . . . . . . . . . . . . . . 18 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 18 1. Introduction Filesystem interfaces typically provide some way to write at a specific position in a file. While HTTP supports reading byte range offsets using the Range header (Section 14 of [RFC9110]), this technique cannot generally be used in PUT, because the server may ignore the Content-Range header while executing the write, causing data corruption. However, by using a method and media type that the server must understand, writes to byte ranges with Content-Range semantics becomes possible even when server support is undetermined. Wright Expires 9 March 2024 [Page 2] Internet-Draft Byte Range PATCH September 2023 This media type is intended for use in a wide variety of applications where overwriting specific parts of the file is desired. This includes idempotently writing data to a stream, appending data to a file, overwriting specific byte ranges, or writing to multiple regions in a single operation (for example, appending audio to a recording in progress while updating metadata at the beginning of the file). 1.1. Notational Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. This document uses ABNF as defined in [RFC5234] and imports grammar rules from [RFC9112]. For brevity, example HTTP requests or responses may add newlines or whitespace, or omit some headers necessary for message transfer. The term "byte" is used in the [RFC9110] sense to mean "octet." Ranges are zero-indexed and inclusive. For example, "bytes 0-0" means the first byte of the document, and "bytes 1-2" is a range with two bytes, starting one byte into the document. Ranges of zero bytes are described by an address offset rather than a range. For example, "at byte 5" would separate the byte ranges 0-4 and 5-9. 2. Modifying a content range with PATCH The Content-Range field in a PUT request requires support by the server in order to be processed correctly. Without specific support, the server's normal behavior would be to ignore the header, replacing the entire resource with just the part that changed, causing data corruption. To mitigate this, Content-Range may be used in conjunction with the PATCH method [RFC5789] as part of a media type whose semantics are to write at the specified byte offset. This document re-uses the "multipart/byteranges" media type, and defines the "message/byterange" media type, for this purpose. A byte range patch lists one or more _parts_. Each part specifies two essential components: Wright Expires 9 March 2024 [Page 3] Internet-Draft Byte Range PATCH September 2023 1. Part fields: a list of HTTP fields that specify metadata, including the range being written to, the length of the body, and information about the target document that cannot be listed in the PATCH headers, e.g. Content-Type (where it would describe the patch itself, rather than the document being updated). 2. A part body: the actual data to write to the specified location. Each part MUST indicate a single contiguous range to be written to. Servers MUST reject byte range patches that don't contain a known range with a 422 or 400 error. (This would mean the client may be using a yet-undefined mechanism to specify the target range.) The simplest form to represent a byte range patch is the "message/ byterange" media type, which is similar to an HTTP message: Content-Range: bytes 2-5/12 cdef This patch represents an instruction to write the four bytes "cdef" at an offset of 2 bytes. A document listing the digits 0-9 in a row, would look like this after applying the patch: 01cdef6789␍␊ Although this example is a text document with a line terminator, patches are only carried as binary data, and can potentially carry or overwrite parts of multi-byte characters. 2.1. The Content-Range field The Content-Range field (as seen inside a patch document) is used to specify where in the target document the part body will be written. The client MAY indicate the anticipated final size of the document by providing the complete-length form, for example bytes 0-11/12. This value of complete-length does not affect the write, however the server MAY use it for other purposes, especially for preallocating an optimal amount of space, and deciding when an upload in multiple parts has finished. If the client does not know or care about the final length of the document, it MAY use * in place of complete-length. For example, bytes 0-11/*. Most random access writes will follow this form. Wright Expires 9 March 2024 [Page 4] Internet-Draft Byte Range PATCH September 2023 As a special case, a Content-Range where the "last-pos" is omitted indicates that the upload length is indeterminate, and only the starting offset is known: Content-Range =/ range-unit SP first-pos "-/" ( complete-length / "*" ) The unsatisfied-range form (e.g. bytes */1000) is not meaningful, it MUST be treated as a syntax error. // This form could potentially be used to specify the intended size // of the target resource, without providing any data at all. 2.2. The Content-Length field A "Content-Length" part field, if provided, describes the length of the part body. (To describe the size of the entire target resource, see the Content-Range field.) If provided, it MUST exactly match the length of the range specified in the Content-Range field, and servers MUST error when the Content- Length mismatches the length of the range. 2.3. The Content-Type field A "Content-Type" part field MUST have the same effect as if provided in a PUT request uploading the entire resource (patch applied). Its use is typically limited to creating resources. 2.4. Other fields Other part fields in the patch document SHOULD have the same meaning as if provided in a PUT request uploading the entire resource (patch applied). Use of such fields SHOULD be limited to cases where the meaning in the HTTP request headers would be different, where they would describe the entire patch, rather than the part. For example, the "Content-Type" field. 2.5. Applying a patch Servers SHOULD NOT accept requests that write beyond, and not adjacent to, the end of the resource. This would create a sparse file, where some bytes are undefined. For example, writing at byte 601 of a resource where bytes 0-599 are defined; this would leave byte 600 undefined. Servers that accept sparse writes MUST NOT disclose existing content, and SHOULD fill in undefined regions with zeros. Wright Expires 9 March 2024 [Page 5] Internet-Draft Byte Range PATCH September 2023 The expected length of the write can be computed from the part fields. If the actual length of the part body mismatches the expected length, this MUST be treated the same as a network interruption at the shorter length, but anticipating the longer length. Recovering from this interruption may involve rolling back the entire request, or saving as many bytes as possible. The client can then recover the same way it would recover from a network error. 2.6. The multipart/byteranges media type The following is a request with a "multipart/byteranges" body to write two ranges in a document: PATCH /uploads/foo HTTP/1.1 Content-Type: multipart/byteranges; boundary=THIS_STRING_SEPARATES Content-Length: 206 If-Match: "xyzzy" If-Unmodified-Since: Sat, 29 Oct 1994 19:43:31 GMT --THIS_STRING_SEPARATES Content-Range: bytes 2-6/25 Content-Type: text/plain 23456 --THIS_STRING_SEPARATES Content-Range: bytes 17-21/25 Content-Type: text/plain 78901 --THIS_STRING_SEPARATES-- The syntax for multipart messages is defined in [RFC2046], Section 5.1.1. While the body cannot contain the boundary, servers MAY use the Content-Length field to skip to the boundary (potentially ignoring a boundary in the body, which would be an error by the client). The multipart/byteranges type may be used for operations where multiple regions must be updated at the same time; clients may have an expectation that if there's an interruption, all of the parts will be rolled back. 2.7. The message/byterange media type When making a request with a single byte range, there is no need for a multipart boundary marker. This document defines a new media type "message/byterange" with the same semantics as a single byte range in a multipart/byteranges message, but with a simplified syntax. Wright Expires 9 March 2024 [Page 6] Internet-Draft Byte Range PATCH September 2023 The "message/byterange" form may be used in a request as so: PATCH /uploads/foo HTTP/1.1 Content-Type: message/byterange Content-Length: 272 If-Match: "xyzzy" If-Unmodified-Since: Sat, 29 Oct 1994 19:43:31 GMT Content-Range: bytes 100-299/600 Content-Type: text/plain [200 bytes...] This represents a request to modify a 600-byte document, overwriting 200 bytes of it, starting at a 100-byte offset. 2.7.1. Syntax The syntax re-uses concepts from the "multipart/byteranges" media type, except it omits the multipart separator, and so only allows a single range to be specified. It is also similar to the "message/ http" media type, except the first line (the status line or request line) is omitted; a message/byterange document can be fed into a message/http parser by first prepending a line like "PATCH / HTTP/1.1". It follows the syntax of HTTP message headers and body. It MUST include the Content-Range header field. If the message length is known by the sender, it SHOULD contain the Content-Length header field. Unknown or nonapplicable header fields MUST be ignored. The field-line and message-body productions are specified in [RFC9112]. byterange-document = *( field-line CRLF ) CRLF [ message-body ] This document has the same semantics as a single part in a "multipart/byteranges" document (Section 5.1.1 of [RFC2046]) or any response with a 206 (Partial Content) status code (Section 15.3.7 of [RFC9110]). A "message/byterange" document may be trivially transformed into a "multipart/byteranges" document by prepending a dash-boundary and CRLF, and appending a close-delimiter (a CRLF, dash-boundary, terminating "--", and optional CRLF). Wright Expires 9 March 2024 [Page 7] Internet-Draft Byte Range PATCH September 2023 2.8. The application/byteranges media type The "application/byteranges" has the same semantics as "multipart/ byteranges" but follows a binary format similar to "message/bhttp" [RFC9292], which may be more suitable for some clients and servers, as all variable length strings are tagged with their length. 2.8.1. Syntax Parsing starts by looking for a "Known-Length Message" or an "Indeterminate-Length Message". One or the other is distinguished by the different Framing Indicator. The remainder of the message is parsed by reading fields, then the content, by a method depending on if the message is known-length or indeterminate-length. If there are additional parts, they begin immediately after the end of a Content. The "Known-Length Field Section", "Known-Length Content", "Indeterminate-Length Field Section", "Indeterminate-Length Content", "Indeterminate-Length Content Chunk", "Field Line" definitions are identical to their definition in message/bhttp. They are used in one or more Known-Length Message and/or Indeterminate-Length Message productions, concatenated together. Wright Expires 9 March 2024 [Page 8] Internet-Draft Byte Range PATCH September 2023 Patch { Message (..) ... } Known-Length Message { Framing Indicator (i) = 8, Known-Length Field Section (..), Known-Length Content (..), } Indeterminate-Length Message { Framing Indicator (i) = 10, Indeterminate-Length Field Section (..), Indeterminate-Length Content (..), } Known-Length Field Section { Length (i), Field Line (..) ..., } Known-Length Content { Content Length (i), Content (..), } Indeterminate-Length Field Section { Field Line (..) ..., Content Terminator (i) = 0, } Indeterminate-Length Content { Indeterminate-Length Content Chunk (..) ..., Content Terminator (i) = 0, } Indeterminate-Length Content Chunk { Chunk Length (i) = 1.., Chunk (..), } Field Line { Name Length (i) = 1.., Name (..), Value Length (i), Value (..), } Wright Expires 9 March 2024 [Page 9] Internet-Draft Byte Range PATCH September 2023 2.9. Range units Currently, the only defined range unit is "bytes", however this may be other, yet-to-be-defined values. In the case of "bytes", the bytes that are read are exactly the same as the bytes that are changed. However, other units may define write semantics different from a read, if symmetric behavior would not make sense. For example, if a Content-Range field adds an item in a JSON array, this write may add a leading or trailing comma, not technically part of the item itself, in order to keep the resulting document well-formed. Even though the length in alternate units isn't changed, the byte length might. This might only be acceptable to servers storing these values in a database or memory structure, rather than on a byte-based filesystem. 3. Segmented document creation with PATCH As an alternative to using PUT to create a new resource, the contents of a resource may be uploaded in segments, written across several PATCH requests. A user-agent may also use PATCH to recover from an interrupted PUT request, if it was expected to create a new resource. The server will store the data sent to it by the user agent, but will not finalize the upload until the final length of the document is known and received. 1. The client makes a PUT or PATCH request to a URL, a portion of which is generated by the client, to be unpredictable to other clients. This first request creates the resource, and should include If-None-Match: * to verify the target does not exist. If a PUT request, the server reads the Content-Length header and stores the intended final length of the document. If a PATCH request, the "Content-Range" field in the "message/byterange" patch is read for the final length. The final length may also be undefined, and defined in a later request. 2. If any request is interrupted, the client may make a HEAD request to determine how much, if any, of the previous response was stored, and resumes uploading from that point. The server will return 200 (OK), but this may only indicate the write has been saved; the server is not obligated to begin acting on the upload until it is complete. Wright Expires 9 March 2024 [Page 10] Internet-Draft Byte Range PATCH September 2023 3. If the client sees from the HEAD response that additional data remains to be uploaded, it may make a PATCH request to resume uploading. Even if no data was uploaded or the resource was not created, the client should attempt creating the resource with PATCH to mitigate the possibility of another interrupted connection with a server that does not save incomplete transfers. However if in response to PATCH, the server reports 405 (Method Not Allowed), 415 (Unsupported Media Type), or 501 (Not Implemented), then the client must resort to a PUT request. 4. The server detects the completion of the final request when the current received data matches the indicated final length. For example, a Content-Range: 500-599/600 field is a write at the end of the resource. The server processes the upload and returns a response for it. For building POST endpoints that support large uploads, clients can first upload the data to a scratch file as described above, and then process by submitting a POST request that links to the scratch file. For updating an existing large file, the client can upload to a scratch file, then execute a MOVE (Section 9.9 of [RFC4918]) over the intended target. 3.1. Example A single PUT request that creates a new resource may be split apart into multiple PATCH requests. Here is an example that uploads a 600-byte document across three 200-byte segments. The first PATCH request creates the resource: PATCH /uploads/foo HTTP/1.1 Content-Type: message/byterange Content-Length: 281 If-None-Match: * Content-Range: bytes 0-199/600 Content-Type: text/plain Content-Length: 200 [200 bytes...] This request allocates a 600 byte document, and uploading the first 200 bytes of it. The server responds with 200, indicating that the complete upload was stored. Additional requests upload the remainder of the document: Wright Expires 9 March 2024 [Page 11] Internet-Draft Byte Range PATCH September 2023 PATCH /uploads/foo HTTP/1.1 Content-Type: message/byterange Content-Length: 283 If-None-Match: * Content-Range: bytes 200-399/600 Content-Type: text/plain Content-Length: 200 [200 bytes...] This second request also returns 200 (OK). A third request uploads the final portion of the document: PATCH /uploads/foo HTTP/1.1 Content-Type: message/byterange Content-Length: 283 If-None-Match: * Content-Range: bytes 200-399/600 Content-Type: text/plain Content-Length: 200 [200 bytes...] The server responds with 200 (OK). Since this completely writes out the 600-byte document, the server may also perform final processing, for example, checking that the document is well formed. The server MAY return an error code if there is a syntax or other error, or in an earlier response as soon as it it able to detect an error, however the exact behavior is left undefined. 4. Preserving Incomplete Uploads with "Prefer: transaction" The stateless design of HTTP generally implies that a request is atomic (otherwise parties would need to keep track of the state of a request while it's in progress). A benefit of this design is that a client does not need to be concerned with the side-effects of only the first half of an upload being honored, if there's an error partway through. However, some clients may desire partial state changes, particularly when remaking the upload is more expensive than the complexity of recovering from an interruption. In these cases, clients will want an incomplete request to be preserved as much as possible, so they may re-synchronize the state and pick up from where the incomplete request was terminated. Wright Expires 9 March 2024 [Page 12] Internet-Draft Byte Range PATCH September 2023 The client's preference for atomic or upload-preserving behavior may be signaled by a Prefer header: Prefer: transaction=atomic Prefer: transaction=persist The transaction=atomic preference indicates that the request SHOULD apply only when a successful response is returned, and not any time during the upload. The transaction=persist preference indicates that uploaded data SHOULD be continuously stored as soon as possible, so that if the upload is interrupted, it is possible to resume the upload from where it left off. This preference is generally applicable to any HTTP request (and not merely for PATCH or byte range patches). Servers SHOULD indicate when this preference was honored, using a "Preference-Applied" response header. For example: Preference-Applied: transaction=persist Servers may consider broadcasting this in a 103 Early Hints response, since once point the final response is written, this may no longer be useful to know. 5. Registrations 5.1. message/byterange Type name: message Subtype name: byterange Required parameters: N/A Optional parameters: N/A Encoding considerations: binary Security considerations: See Section 6 Interoperability considerations: See Section 2.7 of this document Published specification: This document Applications that use this media type: HTTP applications that process filesystem-like writes to locations within a resource. Wright Expires 9 March 2024 [Page 13] Internet-Draft Byte Range PATCH September 2023 Fragment identifier considerations: N/A Additional information: Deprecated alias names for this type: N/A Magic number(s): N/A File extension(s): N/A Macintosh file type code(s): N/A Person and email address to contact for further information: See Aut hors' Addresses section. Intended usage: COMMON Restrictions on usage: None. Author: See Authors' Addresses section. Change controller: IESG 5.2. application/byteranges Type name: application Subtype name: byteranges Required parameters: N/A Optional parameters: N/A Encoding considerations: binary Security considerations: See Section 6 Interoperability considerations: See Section 2.8 of this document Published specification: This document Applications that use this media type: HTTP applications that process filesystem-like writes to locations within a resource. Fragment identifier considerations: N/A Additional information: Deprecated alias names for this type: N/A Magic number(s): N/A File extension(s): N/A Macintosh file type code(s): N/A Person and email address to contact for further information: See Aut hors' Addresses section. Wright Expires 9 March 2024 [Page 14] Internet-Draft Byte Range PATCH September 2023 Intended usage: COMMON Restrictions on usage: None. Author: See Authors' Addresses section. Change controller: IESG 5.3. "transaction" preference Preference: transaction Value: either "atomic" or "persist" Description: Specify if the client would prefer incomplete uploads to be saved, or committed only on success. Reference: Section 4 6. Security Considerations 6.1. Unallocated ranges A byterange patch may permit writes to offsets beyond the end of the resource. This may have non-obvious behavior. Servers supporting sparse files MUST NOT return uninitialized memory or storage contents. Uninitialized regions may be initialized prior to executing the write, or this may be left to the filesystem if it can guarantee that unallocated space will be read as a constant value. If a server fills in unallocated space by initializing it, servers SHOULD protect against patches that make writes to very large offsets. Servers may account for this by treating it as a write by the client, similar to "Document Size Hints" below. 6.2. Document Size Hints A byte range patch is, overall, designed to require server resources that's proportional to the patch size. One possible exception to this rule is the complete-length part of the Content-Range field, which hints at the final upload size. Generally, this does not require the server to (immediately) allocate this amount of data. However, some servers may choose to begin preallocating disk space right away, which could be a very expensive operation compared to the actual size of the request. Wright Expires 9 March 2024 [Page 15] Internet-Draft Byte Range PATCH September 2023 In general, servers SHOULD treat the complete-length hint the same as a PUT request of that size, and issue a 400 (Client Error). // 413 (Payload Too Large) might not be appropriate for this // situation, as it would indicate the patch is too large and the // client should break up the patches into smaller chunks, rather // than the intended final upload size being too large. 7. References 7.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, DOI 10.17487/RFC5234, January 2008, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC9110] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "HTTP Semantics", STD 97, RFC 9110, DOI 10.17487/RFC9110, June 2022, . [RFC9112] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "HTTP/1.1", STD 99, RFC 9112, DOI 10.17487/RFC9112, June 2022, . 7.2. Informative References [RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types", RFC 2046, DOI 10.17487/RFC2046, November 1996, . [RFC4918] Dusseault, L., Ed., "HTTP Extensions for Web Distributed Authoring and Versioning (WebDAV)", RFC 4918, DOI 10.17487/RFC4918, June 2007, . Wright Expires 9 March 2024 [Page 16] Internet-Draft Byte Range PATCH September 2023 [RFC5789] Dusseault, L. and J. Snell, "PATCH Method for HTTP", RFC 5789, DOI 10.17487/RFC5789, March 2010, . [RFC9292] Thomson, M. and C. A. Wood, "Binary Representation of HTTP Messages", RFC 9292, DOI 10.17487/RFC9292, August 2022, . Appendix A. Discussion // This section to be removed before final publication. A.1. Indeterminate Length Uploads There is no standard way for a Content-Range header to indicate an unknown or indeterminate-length body starting at a certain offset; the design of partial content messages requires that the sender know the total length before transmission. However it seems it should be possible to generate an indeterminate-length partial content response (e.g. return a continuously growing audio file starting at a 4MB offset). Fixing this would require a new header, update to HTTP, or a revision of HTTP. A.2. Sparse Documents This pattern can enable multiple, parallel uploads to a document at the same time. For example, uploading a large log file from multiple devices. However, this document does not define any ways for clients to track the unwritten regions in sparse documents, and the existing conditional request headers are designed to cause conflicts. Parallel uploads may require a byte-level locking scheme or conflict- free operators. This may be addressed in a later document. A.3. Recovering from interrupted PUT Servers do not necessarily save the results of an incomplete upload; since most clients prefer atomic writes, many servers will discard an incomplete upload. A mechanism to indicate a preference for atomic vs. non-atomic writes may be defined at a later time. Byte range PATCH cannot by itself be used to recover from an interrupted PUT that updates an existing document. If the server operation is atomic, the entire operation will be lost. If the server saves the upload, it may not possible to know how much of the request was received by the server, and what was old content that already existed. Wright Expires 9 March 2024 [Page 17] Internet-Draft Byte Range PATCH September 2023 One technique would be to use a 1xx interim response to indicate a location where the partial upload is being stored. If PUT request is interrupted, the client can make PATCH requests to this temporary, non-atomic location to complete the upload. When the last part is uploaded, the original interrupted PUT request will finish. A.4. Splicing and Binary Diff Operations more complicated than standard filesystem operations are out of scope for this media type. A feature of byte range patch is an upper limit on the complexity of applying the patch. In contrast, prepending, splicing, replace, or other complicated file operations could potentially require the entire file on disk be rewritten. Consider registering a media type for VCDIFF in this document, under the topic of "Media type registrations for byte-level patching". Author's Address Austin Wright Email: aaa@bzfx.net Wright Expires 9 March 2024 [Page 18]