JMAP N.M. Jenkins, Ed. Internet-Draft Fastmail Intended status: Standards Track 29 August 2023 Expires: 1 March 2024 JMAP Sharing draft-ietf-jmap-sharing-04 Abstract This document specifies a data model for sharing data between users using JMAP. Specifications for other data types can reference this document to support a consistent model of sharing. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 1 March 2024. Copyright Notice Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Jenkins Expires 1 March 2024 [Page 1] Internet-Draft JMAP Sharing August 2023 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1. Notational Conventions . . . . . . . . . . . . . . . . . 3 1.2. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3 1.3. Data Model Overview . . . . . . . . . . . . . . . . . . . 3 1.4. Subscriptions . . . . . . . . . . . . . . . . . . . . . . 4 1.5. Addition to the Capabilities Object . . . . . . . . . . . 4 1.5.1. urn:ietf:params:jmap:principals . . . . . . . . . . . 4 1.5.2. urn:ietf:params:jmap:principals:owner . . . . . . . . 5 2. Principals . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1. Principal/get . . . . . . . . . . . . . . . . . . . . . . 6 2.2. Principal/changes . . . . . . . . . . . . . . . . . . . . 6 2.3. Principal/set . . . . . . . . . . . . . . . . . . . . . . 6 2.4. Principal/query . . . . . . . . . . . . . . . . . . . . . 7 2.4.1. Filtering . . . . . . . . . . . . . . . . . . . . . . 7 2.5. Principal/queryChanges . . . . . . . . . . . . . . . . . 7 3. Share Notifications . . . . . . . . . . . . . . . . . . . . . 8 3.1. Auto-deletion of Notifications . . . . . . . . . . . . . 8 3.2. Object Properties . . . . . . . . . . . . . . . . . . . . 8 3.3. ShareNotification/get . . . . . . . . . . . . . . . . . . 9 3.4. ShareNotification/changes . . . . . . . . . . . . . . . . 9 3.5. ShareNotification/set . . . . . . . . . . . . . . . . . . 9 3.6. ShareNotification/query . . . . . . . . . . . . . . . . . 9 3.6.1. Filtering . . . . . . . . . . . . . . . . . . . . . . 9 3.6.2. Sorting . . . . . . . . . . . . . . . . . . . . . . . 10 3.7. ShareNotification/queryChanges . . . . . . . . . . . . . 10 4. Framework for shared data . . . . . . . . . . . . . . . . . . 10 4.1. Example . . . . . . . . . . . . . . . . . . . . . . . . . 11 5. Security Considerations . . . . . . . . . . . . . . . . . . . 12 5.1. Spoofing . . . . . . . . . . . . . . . . . . . . . . . . 12 5.2. Unnoticed sharing . . . . . . . . . . . . . . . . . . . . 12 5.3. Unauthorised principals . . . . . . . . . . . . . . . . . 12 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 12 6.1. JMAP Capability Registration for "principals" . . . . . . 13 6.2. JMAP Capability Registration for "principals:owner" . . . 13 7. Normative References . . . . . . . . . . . . . . . . . . . . 13 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 13 1. Introduction JMAP ([RFC8620] JSON Meta Application Protocol) is a generic protocol for synchronizing data, such as mail, calendars or contacts, between a client and a server. It is optimized for mobile and web environments, and aims to provide a consistent interface to different data types. Jenkins Expires 1 March 2024 [Page 2] Internet-Draft JMAP Sharing August 2023 This specification defines a data model to represent entities in a collaborative environment, and a framework for sharing data between them that can be used to provide a consistent sharing model for different data types. It does not define _what_ may be shared, or the granularity of permissions, as this will depend on the data in question. 1.1. Notational Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. Type signatures, examples, and property descriptions in this document follow the conventions established in Section 1.1 of [RFC8620]. Data types defined in the core specification are also used in this document. 1.2. Terminology The same terminology is used in this document as in the core JMAP specification, see [RFC8620], Section 1.6. The terms Principal, and ShareNotification (with these specific capitalizations) are used to refer to the data types defined in this document and instances of those data types. 1.3. Data Model Overview A Principal (see Section 2) represents an individual, team, or resource (e.g., a room or projector). The object contains information about the entity being represented, such as a name, description, and time zone. It may also hold domain-specific information. A Principal may be associated with zero or more Accounts (see [RFC8620], Section 1.6.2) containing data belonging to the principal. Managing the set of principals within a system is out of scope for this specification, as it is highly domain specific. It is likely to map directly from a directory service or other user management system. Data types may allow users to share data with others by assigning permissions to principals. When a user's permissions are changed, a ShareNotification object is created for them so a client can inform the user of the changes. Jenkins Expires 1 March 2024 [Page 3] Internet-Draft JMAP Sharing August 2023 1.4. Subscriptions Permissions determine whether a user _may_ access data, but not whether they _want_ to. Some shared data is of equal importance as the user's own, while other data is just there should the user wish to explicitly go find it. Clients will often want to differentiate the two; for example, a company may share mailing list archives for all departments with all employees, but a user may only generally be interested in the few they belong to. They would have _permission_ to access many mailboxes, but can _subscribe_ to just the ones they care about. The client would provide separate interfaces for reading mail in subscribed mailboxes and browsing all mailboxes they have permission to access in order to manage their subscriptions. The JMAP Session object (see [RFC8620], Section 2) typically includes an object in the accounts property for every account that the user has access to. Collaborative systems may share data between a very large number of Principals, most of which the user does not care about day-to-day. The Session object MUST only include Accounts where either the user is subscribed to at least one record (see [RFC8620], Section 1.6.3) in the account, or the account belongs to the user. StateChange events for changes to data SHOULD only be sent for data the user has subscribed to and MUST NOT be sent for any account where the user is not subscribed to any records in the account, except where that account belongs to the user. The server MAY reject the user's attempt to subscribe to some resources even if they have permission to access them, e.g., a calendar representing a location. A user may query the set of Principals they have access to with "Principal/query" (see Section 2.4). The Principal object may then provide Account objects if the user has permission to access data for that principal, even if they are not yet subscribed. 1.5. Addition to the Capabilities Object The capabilities object is returned as part of the JMAP Session object; see [RFC8620], Section 2. This document defines two additional capability URIs. 1.5.1. urn:ietf:params:jmap:principals Represents support for the Principal and ShareNotification data types and associated API methods. The value of this property in the JMAP Session capabilities property is an empty object. Jenkins Expires 1 March 2024 [Page 4] Internet-Draft JMAP Sharing August 2023 The value of this property in an account’s accountCapabilities property is an object that MUST contain the following information on server capabilities and permissions for that account: * *currentUserPrincipalId*: Id|null The id of the principal in this account that corresponds to the user fetching this object, if any. 1.5.2. urn:ietf:params:jmap:principals:owner This URI is solely used as a key in an account’s accountCapabilities property; it does not appear in the JMAP Session capabilities. Support is implied by the urn:ietf:params:jmap:principals session capability. If present, the account (and data therein) is owned by a principal. Some accounts may not be owned by a principal (e.g., the account that contains the data for the principals themselves), in which case this property is omitted. The value of this property is an object with the following properties: * *accountIdForPrincipal*: Id The id of an account with the urn:ietf:params:jmap:principals capability that contains the corresponding Principal object. * *principalId*: Id The id of the Principal that owns this account. 2. Principals A Principal represents an individual, group, location (e.g., a room), resource (e.g., a projector) or other entity in a collaborative environment. Sharing in JMAP is generally configured by assigning rights to certain data within an account to other principals, for example a user may assign permission to read their calendar to a principal representing another user, or their team. In a shared environment such as a workplace, a user may have access to a large number of principals. In most systems the user will have access to a single Account containing Principal objects, but they may have access to multiple if, for example, aggregating data from different places. A *Principal* object has the following properties: * *id*: Id (immutable; server-set) Jenkins Expires 1 March 2024 [Page 5] Internet-Draft JMAP Sharing August 2023 The id of the principal. * *type*: String This MUST be one of the following values: - individual: This represents a single person. - group: This represents a group of people. - resource: This represents some resource, e.g., a projector. - location: This represents a location. - other: This represents some other undefined principal. * *name*: String The name of the principal, e.g., "Jane Doe", or "Room 4B". * *description*: String|null A longer description of the principal, for example details about the facilities of a resource, or null if no description available. * *email*: String|null An email address for the principal, or null if no email is available. * *timeZone*: String|null The time zone for this principal, if known. If not null, the value MUST be a time zone id from the IANA Time Zone Database TZDB (https://www.iana.org/time-zones). * *capabilities*: String[Object] A map of JMAP capability URIs to domain specific information about the principal in relation to that capability, as defined in the document that registered the capability. * *accounts*: Id[Account]|null A map of account id to Account object for each JMAP Account containing data for this principal that the user has access to, or null if none. 2.1. Principal/get This is a standard "/get" method as described in [RFC8620], Section 5.1. 2.2. Principal/changes This is a standard "/changes" method as described in [RFC8620], Section 5.2. Note, implementations backed by an external directory may be unable to calculate changes, in which they will always return a "cannotCalculateChanges" error, as described in the core JMAP specification. 2.3. Principal/set This is a standard "/set" method as described in [RFC8620], Section 5.3. Jenkins Expires 1 March 2024 [Page 6] Internet-Draft JMAP Sharing August 2023 Users SHOULD be allowed to update the "name", "description" and "timeZone" properties of the Principal with the same id as the "currentUserPrincipalId" in the Account capabilities. However, the server may reject this change, and probably will reject any other change, with a forbidden SetError. Managing principals is likely tied to a directory service or some other vendor-specific solution, and may occur out-of-band, or via an additional capability defined elsewhere. 2.4. Principal/query This is a standard "/query" method as described in [RFC8620], Section 5.5 2.4.1. Filtering A *FilterCondition* object has the following properties: * *accountIds*: String[] A list of account ids. The Principal matches if any of the ids in this list are keys in the Principal's "accounts" property (i.e., if any of the account ids belong to the principal). * *email*: String Looks for the text in the email property. * *name*: String Looks for the text in the name property. * *text* String Looks for the text in the name, email, and description properties. * *type*: String The type must be exactly as given to match the condition. * *timeZone*: String The timeZone must be exactly as given to match the condition. All conditions in the FilterCondition object must match for the Principal to match. 2.5. Principal/queryChanges This is a standard "/queryChanges" method as described in [RFC8620], Section 5.6. Note, implementations backed by an external directory may be unable to calculate changes, in which they will always return a "cannotCalculateChanges" error, as described in the core JMAP specification. Jenkins Expires 1 March 2024 [Page 7] Internet-Draft JMAP Sharing August 2023 3. Share Notifications The ShareNotification data type records when the user's permissions to access a shared object changes. ShareNotification are only created by the server; users cannot create them explicitly. Notifications are stored in the same Account as the Principals. Clients SHOULD present the list of notifications to the user and allow them to dismiss them. To dismiss a notification you use a standard "/set" call to destroy it. The server SHOULD create a ShareNotification whenever the user's permissions change on an object. It SHOULD NOT create a notification for permission changes to a group principal, even if the user is in the group. 3.1. Auto-deletion of Notifications The server MAY limit the maximum number of notifications it will store for a user. When the limit is reached, any new notification will cause the previously oldest notification to be automatically deleted. The server MAY coalesce notifications if appropriate, or remove notifications that it deems are no longer relevant or after a certain period of time. The server SHOULD automatically destroy a notification about an object if the user subscribes to that object. 3.2. Object Properties The *ShareNotification* object has the following properties: * *id*: String (immutable; server-set) The id of the ShareNotification. * *created*: UTCDate (immutable; server-set) The time this notification was created. * *changedBy*: Person (immutable; server-set) Who made the change. - *name*: String The name of the person who made the change. - *email*: String|null The email of the person who made the change, or null if no email is available. - *principalId*: String|null The id of the Principal corresponding to the person who made the change, or null if no associated principal. * *objectType*: String (immutable; server-set) Jenkins Expires 1 March 2024 [Page 8] Internet-Draft JMAP Sharing August 2023 The name of the data type for the object whose permissions have changed, e.g., "Calendar" or "Mailbox". * *objectAccountId*: String (immutable; server-set) The id of the account where this object exists. * *objectId*: String (immutable; server-set) The id of the object that this notification is about. * *oldRights*: String[Boolean]|null (immutable; server-set) The "myRights" property of the object for the user before the change. * *newRights*: String[Boolean]|null (immutable; server-set) The "myRights" property of the object for the user after the change. * *name*: String (immutable; server-set) The name of the object at the time the notification was made. Determining the name will depend on the data type in question, for example it might be the "title" property of a CalendarEvent or the "name" of a Mailbox, and is implementation specific. The name is to show to users who have had their access rights to the object removed, so that they know what it is they can no longer access. 3.3. ShareNotification/get This is a standard "/get" method as described in [RFC8620], Section 5.1. 3.4. ShareNotification/changes This is a standard "/changes" method as described in [RFC8620], Section 5.2. 3.5. ShareNotification/set This is a standard "/set" method as described in [RFC8620], Section 5.3. Only destroy is supported; any attempt to create/update MUST be rejected with a forbidden SetError. 3.6. ShareNotification/query This is a standard "/query" method as described in [RFC8620], Section 5.5. 3.6.1. Filtering A *FilterCondition* object has the following properties: * *after*: UTCDate|null Jenkins Expires 1 March 2024 [Page 9] Internet-Draft JMAP Sharing August 2023 The creation date must be on or after this date to match the condition. * *before*: UTCDate|null The creation date must be before this date to match the condition. * *objectType*: String The objectType value must be identical to the given value to match the condition. * *objectAccountId*: String The objectAccountId value must be identical to the given value to match the condition. 3.6.2. Sorting The "created" property MUST be supported for sorting. 3.7. ShareNotification/queryChanges This is a standard "/queryChanges" method as described in [RFC8620], Section 5.6. 4. Framework for shared data Shareable data types SHOULD define the following three properties: * *isSubscribed*: Boolean Has the user indicated they wish to see this data? The initial value for this when data is shared by another user is implementation dependent, although data types may give advice on appropriate defaults. * *myRights*: String[Boolean] The set of permissions the user currently has. Appropriate permissions are domain specific and must be defined per data type. Each key is the name of a permission defined for that data type. The value for the key is true if the user has the permission, or false if they do not. * *shareWith*: Id[String[Boolean]]|null A map of principal id to rights to give that principal (in the same format as the myRights property), or null if not shared with anyone. The account id for the principal id can be found in the capabilities of the Account this object is in (see Section 1.5.2). Users with appropriate permission may set this property to modify who the data is shared with. The principal that owns the account this data is in MUST NOT be in the set of sharees; their rights are implicit. Jenkins Expires 1 March 2024 [Page 10] Internet-Draft JMAP Sharing August 2023 4.1. Example Suppose we are designing a data model for a very simple todo list. There is a Todo data type representing a single item to do, each of which belongs to a single TodoList. The specification makes the lists sharable by referencing this document and defining the common properties. First it would define a set of domain-specific rights. For example, a TodoListRights object may have the following properties: * *mayRead*: Boolean The user may fetch this TodoList, and any Todos that belong to this TodoList. * *mayWrite*: Boolean The user may create, update, or destroy Todos that belong to this TodoList, and may change the "name" property of this TodoList. * *mayAdmin*: Boolean The user may see and modify the "myRights" property of this TodoList, and may destroy this TodoList. Then in the TodoList data type, we would include the three common properties, in addition to any type-specific properties (like "name" in this case): * *id*: Id (immutable; server-set) The id of the object. * *name*: String A name for this list of todos. * *isSubscribed*: Boolean Has the user indicated they wish to see this list? If false, clients should not display this todo list with the user's other lists, but should provide a means for users to see and subscribe to all lists that have been shared with them. * *myRights*: TodoListRights The set of permissions the user currently has for this todo list. * *shareWith*: Id[TodoListRights]|null A map of principal id to rights to give that principal, or null if not shared with anyone or the user does not have the "mayAdmin" right for this list. Users with the "mayAdmin" right may set this property to modify who the data is shared with. The principal that owns the account this data is in MUST NOT be in the set of sharees; their rights are implicit. Jenkins Expires 1 March 2024 [Page 11] Internet-Draft JMAP Sharing August 2023 A client wishing to let the user configure sharing would look at the account capabilities for the Account containing the Todo data, and find the "urn:ietf:params:jmap:principals:owner" property, as per Section 1.5.2. From this it can find the account with the Principal data and fetch the list of principals to offer the user to share the list with. 5. Security Considerations All security considerations of JMAP [RFC8620] apply to this specification. Additional considerations are detailed below. 5.1. Spoofing Allowing users to edit their own Principal's name (and, to a lesser extent, description) could allow a user to change their name to that of another user in the system, potentially tricking others into sharing private data with them. Servers may choose to forbid this, and SHOULD keep logs of such changes to provide an audit trail. 5.2. Unnoticed sharing Sharing data with another user allows someone to turn a transitory account compromise (e.g., brief access to an unlocked, logged in client) into a persistant compromise (by setting up sharing with a user controlled by the attacker). This can be mitigated by requiring further authorisation for configuring sharing, or sending notifications to the sharer via another channel whenever a new sharee is added. 5.3. Unauthorised principals The set of principals within a shared environment SHOULD be strictly controlled. If adding a new principal is open to the public, risks include: * An increased risk of a user accidentally sharing data with an unintended person. * An attacker may share unwanted or offensive information with the user. * An attacker may share items with spam content in the names in order to generate ShareNotification objects, which are likely to be prominently displayed to the sharee. 6. IANA Considerations Jenkins Expires 1 March 2024 [Page 12] Internet-Draft JMAP Sharing August 2023 6.1. JMAP Capability Registration for "principals" IANA will register the "principals" JMAP Capability as follows: Capability Name: urn:ietf:params:jmap:principals Specification document: this document Intended use: common Change Controller: IETF Security and privacy considerations: this document, Section 5 6.2. JMAP Capability Registration for "principals:owner" IANA will register the "principals:owner" JMAP Capability as follows: Capability Name: urn:ietf:params:jmap:principals:owner Specification document: this document Intended use: common Change Controller: IETF Security and privacy considerations: this document, Section 5 7. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC8620] Jenkins, N. and C. Newman, "The JSON Meta Application Protocol (JMAP)", RFC 8620, DOI 10.17487/RFC8620, July 2019, . Author's Address Jenkins Expires 1 March 2024 [Page 13] Internet-Draft JMAP Sharing August 2023 Neil Jenkins (editor) Fastmail PO Box 234, Collins St West Melbourne VIC 8007 Australia Email: neilj@fastmailteam.com URI: https://www.fastmail.com Jenkins Expires 1 March 2024 [Page 14]